Who is this article relevant to?
This article is for anyone who wants to purchase a dedicated router for their Smartsuit Pro II.
Which products is this article relevant for?
Smartsuit Pro II
Most standard Wi-Fi routers that are compatible with either 2.4GHz or 5GHz should work with the Smartsuit Pro (I and II).
When setting up your Rokoko motion capture products for the first time, try using your existing router first to see if it meets your needs. If you see that your existing router does not meet your needs, please consider the following options (no sponsored links or brands).
Important
- Some Internet Service Providers' (ISP) routers like Sky, Telus, Verizon, Bell and AT&T are not supported by Rokoko Studio and thus, you won't be able to connect your Rokoko hardware to those.
- If you are using a router that has AX wifi technology, please make sure it's set up in a mode that includes n and ac wifi technologies as well. You should see an option similar to this enabled: Wifi mode: b/n/ac/ax mixed. WiFi with only AX mode will not work.
In the following list, we've included options for every budget.
ASUS
TP-Link
NETGEAR
Please note that the Smartsuit Pro can only be assigned an IPv4 IP address (e.g. 172.168.1.245) and does not currently support IPv6 IP addresses (e.g.2001:0db8:85a3:0000:0000:8a2e:0370:7334).