If your Smartgloves failed to update the firmware or if they are loading in Studio Beta indefinitely, please apply the following procedure.
NOTE: Studio must not be running!
- Connect only one Smartglove directly to your computer with the USB-C to A cable (do not have the Smartsuit connected)
- Please download the RKK_UPD.zip file(attached at the bottom of this article), unzip it on Desktop(as a folder)
- Then please double-click on SGup.bat and your Smartgloves will be updated to the latest version 2.2.1
After it has been installed successfully, disconnect this Smartglove, connect the other one, wait for 2-3" and re-run SGup.bat