If your Smartgloves failed updating the firmware, please apply the following procedure.
NOTE: Studio must not be running!
- Connect only one Smartglove directly to your computer with the USB-C to A cable (do not have the Smartsuit connected)
- Please download the RKK_UPD.zip file(attached at the bottom of this article), unzip it on Desktop(as a folder)
- Then please double click on SGup.bat and your Smartgloves will be updated to latest version 2.2.0
After it has been installed successfully, disconnect this Smartglove, connect the other one, wait 2-3" and re-run SGup.bat