Who is this article relevant to?
This article is for anyone who wants to learn more about the internal WiFi hotspot of the Smartsuit Pro
Which version is this article relevant for?
Smartsuit Pro Smartsuit Pro II
With the Internal WiFi hotspot mode you can connect the Smartsuit Pro directly to your computer, without the need for an external network or router. This will not provide similar performance in terms of range and stability of frame rate when compared with a dedicated router. WiFi Hotspot mode will not be possible with a computer that does not have a Wifi module. (which is often the case with desktop machines)
You only need a Rokoko Smartsuit Pro and a computer with a Wifi adaptor. That's it!
Before you begin
Please ensure that you have disabled all firewalls on your computer, as they might interfere with the communication of the Smartsuit Pro's hub to your computer. To work with the firewall enabled, please check our guide here.
Activating WiFi Hotspot mode on the Smartsuit Pro Hub
Hold down the power button down for 3 Seconds, until it starts blinking red.
Connecting to your Smartsuit Pro's Hotspot
Open the network settings on your computer and find the network "SmartsuitPro_Hotspot_XXX", ("XXX" is a substitute for your Smartsuit Pro's HUB ID). Connect to the network using the password: justimagine
If the Wifi configuration window asks you for a PIN number, please disregard and click on "Connect using a security key instead", then enter the password justimagine
You have now successfully connected your Smartsuit using the Hotspot mode, a grey avatar should appear in Rokoko Studio, as well as an "unpaired input device" in the right-hand side panel.
To switch back to the "regular" external wifi mode, hold the power button again.
Q: Why can I only switch to Hotspot mode and go back to "regular" WiFi mode once?
A: For now, you can only switch back and forth once without rebooting the Smartsuit. Simply unplug the power bank and plug it back in, and then you can switch to Hotspot mode again.
Q: Can I connect multiple Smartsuit Pro's at once in Hotspot mode?
A: You can currently only connect 1 Smartsuit Pro at a time.
Q: Can I receive Smartsuit Pro data to several devices at the same time in Hotspot mode?
A: As for now, you can only send to one computer at a time. In a later firmware release we will change this so the Smartsuit's WiFi module can broadcast to multiple devices.
Q: What is the range of the Hotspot mode?
A: It really depends what WiFi module resides inside your computer. You can do a number of things to ensure the best connection, e.g. have a WiFi antenna booster connected to your PC or laptop. You might see frame rate drops in Studio if too many objects are standing in the way of the Smartsuit's Hub and your computer. We recommend only using the hotspot mode if you are in a situation where an external router cannot be used.
Q: Can I change the password for the Smartsuit's Hotspot?
A: This is currently not possible but is on the roadmap.